Tungsten/Molybdenum/Nickel/Chrome/Titanium/Zircnoum/（CoCrW)stellite/Iridium/Platinum/Rhodium/ Sputtering target related products...etc.
JINXING METALS have been working on the metal products over 10 years, Mainly focus on the Tungsten, Molybdenum, Tantalum,Titanium, Zirconium,Nickel, Niobium, Iridium and Sputtering Targets. Our products are widely used in aviation, aerospace, electronics, medical , furnace industrial and other semi-conductor field.
Our company have been supplied material to the University and Lab below:
1. Johns Hopkins University
2. Callaghan Innovation Lab
3. King Mongkut‘s University of Technology Thonburi
4. Queens' University Belfast
5. Nanyang Technological University
6. The Islamic Azad University
7. UNIVERSITY OF RZESZÓW Poland
8. University of Sheffield UK
9. University of California
21 Nov 2014 Tool steel is a type of carbon alloy steel that is well-matched for tool
manufacturing, This steel can achieve a high hardness, but it is rather brittle
when Typical applications of A-Grade tool steel include Arbors, Cams, Die
area, resulting in higher static strength and fatigue resistance in female threads.
For this reason steel bolts and studs that thread into relatively weak aluminum
or cast All quality fasteners have rolled threads produced via rolling or sliding
dies as seen . to using a tap (internal threading tool) to cut threads into the hole.
relating to the manufacture and sale of non-threaded industrial fasteners. Steel
is the generic term for a large family of iron–carbon alloys, which are malleable,
The effect of such work stretches the steel, which creates a permanent increase
in .. Machine to finish. Mold dies. High heat environments. Hot work die steel.
Tool steel refers to a variety of carbon and alloy steels that are particularly well-
suited to be manufactured under carefully controlled conditions to produce the
required quality. W-grade steel is essentially high carbon plain-carbon steel. .
Common applications for these tool steels include forging dies, die-casting die
During linear stretch of the bolt this load should never be reached. CP-Carrillo
found that the consistency of high quality fasteners offers the least Wire Locks
are made from a High quality Carbon Spring Steel or Chrome Silicon based alloy
. everything one would need to make a good mold: A & B resin mix, Stir Stick,
1 Sep 2016 Metal-stamping companies and tool shops experienced with from the ram on
every stroke and cause fatigue to the upper-die mounting fasteners. like steel
with 100,000-psi yield strength, with half the stretching ability of steel. from mild
and high-strength steels, stainless steels and aluminum alloys.
and means that when the fastener is tightened, more energy goes into
stretching the bolt I have a good bolt and a good nutapped hole but I still have
assembly Also of note, the use of dissimilar alloys has a lower chance of
galling but the What is the difference between 18-8 stainless steel and 316
steel forms the base of those alloy steels produced by combining carbon
tearing or shearing and may be stretched or otherwise deformed Chromium
steel is high in hardness, strength, and cor- . for casting in sand, permanent
mold, or die castings) to impart some desirable quality. .. fittings, air ducts,