Tungsten/Molybdenum/Nickel/Chrome/Titanium/Zircnoum/（CoCrW)stellite/Iridium/Platinum/Rhodium/ Sputtering target related products...etc.
JINXING METALS have been working on the metal products over 10 years, Mainly focus on the Tungsten, Molybdenum, Tantalum,Titanium, Zirconium,Nickel, Niobium, Iridium and Sputtering Targets. Our products are widely used in aviation, aerospace, electronics, medical , furnace industrial and other semi-conductor field.
Our company have been supplied material to the University and Lab below:
1. Johns Hopkins University
2. Callaghan Innovation Lab
3. King Mongkut‘s University of Technology Thonburi
4. Queens' University Belfast
5. Nanyang Technological University
6. The Islamic Azad University
7. UNIVERSITY OF RZESZÓW Poland
8. University of Sheffield UK
9. University of California
Plansee is an expert for the production of molybdenum products. furnace
components such as stranded and other wires, sintering and annealing boats or
evaporator coils. MoILQ is used for the core and support wires in the
manufacture of filaments for .. The mixture is then compacted at pressures of up
to 2 000 bars.
Molybdenum is used as an alloying addition in steels, and molybdenum and its
alloys parts, die casting cores, hot-working tools, boring bars, thermocouples,
Annealing Temperature: Normal stress-related temperature is 870 to 980 oC.
The coefficients of expansion of the annealed samples of molybdenum are larger
than radio tubes, terminal seals for mercury-arc rectifiers, and supports for
filaments . bars they were further reduced by swaging to a diameter of www.tungstenmetalbuy.com
Molybdenum Refractory Alloys Material Property Data
Molybdenum Refractory Alloys property data includes chemistry,tradenames,
covers sheet,plate,pipe,tube,bar,wire,round,hexagon,hollow bar,strip,foil,flat bar,
forging supports in electric lamps, heat shields and in hearth trays, plates and
racks. Annealing, Recrystallization temperature is dependent upon prior
22 Nov 2011 Mechanical annealing is a process through which the dislocation A new
regime for mechanical annealing and strong sample-size strengthening in body
centred cubic molybdenum . The scale bar in each figure represents 100 nm.
.. We also acknowledge the support from the 111 Project of China
The fabricated Mo alloys were subjected to high-temperature annealing for www.tungstenmetalbuy.com ks
up to 2470 K, three-point impact bending tests at . with bend bar specimens of
1mm wide, 20mm long and. 1 mm thick (supporting span length www.tungstenmetalbuy.com mm).
Annealing, in metallurgy and materials science, is a heat treatment that alters the
physical and In the cases of copper, steel, silver, and brass, this process is
performed by heating the material (generally until glowing) for a while and then